CentOS系统VMware克隆后重新设置成eth0

问题：用VMware克隆CentOS6.4后，发现系统内只有eth1,而且/etc/sysconfig/network-scripts/下只有，ifcfg-eth0文件，虽然可以上网，但无法设置静态IP。

ifconfig eth0

eth1: error fetching interface @R_174_4045@ion: Device not found

解决：vi /etc/udev/rules.d/70-persistent-net.rules 显示为：

# PCI device 0x8086:0x100f (e1000)

SUBSYstem=="net",ACTION=="add",DRIVERS=="?*",ATTR{address}=="00:0c:29:48:85:9c",ATTR{type}=="1",KERNEL=="eth*",NAME="eth1"

将 NAME="eth1" 改成NAME="eth0"

并将 ATTR{address}=="00:0c:29:48:85:9c",中的网卡地址改到

/etc/sysconfig/network-scripts/ifcfg-eth0 文件中，HWADDR="00:0C:29:48:85:9C"，使他们对应。

然后reboot

ifconfig eth0

eth0Link encap:EthernetHWaddr 00:0C:29:48:85:9C

inet addr:192.168.74.148Bcast:192.168.74.255Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe48:859c/64 Scope:Link

UP broADCAST RUNNING MULTICASTMTU:1500Metric:1

RX packets:5032 errors:0 dropped:0 overruns:0 frame:0

TX packets:3674 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:5762656 (5.4 MiB)TX bytes:209372 (204.4 KiB)

完成。